Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Raleigh?
Garage door installation in Raleigh typically costs $700 – $2,200 for a new door, including the door itself and professional installation. Most single-car doors land near the lower end, and most double-car doors with insulated panels land near the upper end. Opener installation, if you’re adding one, runs $250 – $550 on top. The written estimate always sets the final price.
That range covers the work from start to finish: removing the old door, assembling and hanging the new one, balancing the springs, and testing the travel. What moves the number up or down is mostly the door you pick and the condition of the opening it has to fit into.
Garage Door Installation Cost Breakdown (2026)
Here’s how the line items stack up for a typical Raleigh installation. These are estimated ranges, not quotes. Your written estimate is the number that matters.
| Line Item | Typical Estimated Range |
|---|---|
| New door installation (door + labor, single door) | $700 – $1,400 |
| New door installation (door + labor, double door) | $1,200 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement (when only a section is damaged) | $250 – $500 |
| Spring repair | $180 – $340 (one spring) |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| General garage door repair (the work that avoids a full replacement) | $150 – $600 |
The $700 – $2,200 installation range is the whole-job number; the line items below it are what drives the final figure. Note that spring repair is priced per spring. A matched pair is usually replaced together, so a pair costs about twice that range. If the installer finds worn cables or bent track while removing the old door, those are separate line items at the ranges above.
Three things move the price most: door material and insulation, door size, and whether the existing opener and track are being reused or replaced. A basic steel non-insulated single door sitting at $700 doesn’t become a $2,200 job unless the opening needs work or the door is upgraded. Insulated doors, glass-panel styles, and double-car sizes are what push toward the top of the range.
What Affects Garage Door Installation Pricing in Raleigh
- Door material and insulation. Steel sits at the bottom of the range, aluminum and composite in the middle, and wood or full-view glass at the top. Insulated doors cost more than uninsulated ones, and the gap is biggest on double-car sizes.
- Door size. A single-car door (roughly 8 to 9 feet wide) costs less than a double-car door (roughly 16 feet wide) because there’s more material, more track, and heavier springs involved. A double door can run nearly twice a single door of the same style.
- Whether the opener is replaced too. Reusing a working opener keeps the job in the door-only range. Adding an opener installation tacks on $250 – $550. Many modern setups pair a belt-drive opener with a new door, and the opener is priced separately because it’s a separate component.
- Condition of the opening and framing. If the old door came down cleanly and the framing is square, installation is straightforward. Bent track, rotted framing, or a header that needs attention adds time and parts. A headroom check happens before the door is ordered.
- Take-down and disposal of the old door. Most installations include hauling the old door away. If the old door is unusually heavy or oversized, it takes more hands and more time.
- Door type and local home styles. In Raleigh’s older neighborhoods, many homes have low-headroom garages or door openings sized for older cars, which can limit which doors fit without extra framing work. Newer construction tends to have standard openings that accept off-the-shelf sizes.
The climate matters too, in a smaller way. Raleigh’s humid summers and occasional freezing winters are hard on steel doors and on the wood facing around the opening, so an insulated door resists condensation on the inside panel better than an uninsulated one. It’s not a reason to replace a working door, but it’s a reason to favor insulation when you’re already buying.
How to Save on Garage Door Installation
The biggest lever is the door itself. Choosing a standard-size, steel, insulated door in a common color keeps you near the middle of the range, and that’s usually the right call for a house that isn’t going on the market. Custom sizes, glass panels, and wood species are where prices climb fastest.
- Reuse a working opener. If your current opener is healthy, keep it. You save the full $250 – $550 opener installation line item. We’ll tell you honestly whether the one you have is worth keeping.
- Fix small things before they compound. A bent track ($120 – $240) or worn rollers ($110 – $220) caught early can extend the life of a door that doesn’t need replacing yet. General garage door repair at $150 – $600 is almost always cheaper than a new door.
- Get the door measured for the opening, not the other way around. Ordering a door that fits your existing opening exactly avoids framing work and custom pricing. The measurement happens first, every time.
- Ask about the estimate in writing. A written estimate breaks down the door, labor, and any parts so you can see what’s driving the number. Ours is free, and we work on the brand you already have or the brand you want.
- Consider repair before replacement. If the panels are intact and the problem is the opener, springs, or track, repair at $150 – $600 beats a new door at $700 – $2,200. Repair or replace – we’ll tell you which one actually makes sense.
Call (866) 942-6232 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll look at the opening, ask what you want the door to do, and give you a written number before any work starts.
What’s Included in a Raleigh Garage Door Installation?
A full installation includes removing the old door and hardware, assembling the new door, mounting the track and springs, balancing the door so it lifts easily by hand, connecting or installing the opener if one is being added, and testing the safety reverse. Old door haul-away is typically part of the job. What’s not included, unless it’s on the estimate, is framing repair, electrical work for a new opener, or upgraded hardware.
We handle the three core services under one roof: garage door repair, garage door opener repair, and full garage door installation. One call covers it, and there’s no hand-off to a subcontractor when a brand comes up that somebody doesn’t know. Our technicians have up to experience and are trained across product lines, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters when your existing opener is a Chamberlain and the new door is a Clopay – we’re not guessing at either one.
If you’re starting fresh and want to understand the full scope of what we do, the Orchard Garage Door Repair page lays out the three service categories. And if you’re new to the area and want to know how we approach work across the city, the Raleigh page is the place to start.
Should You Repair or Replace Your Garage Door in Raleigh?
Repair makes sense when the door structure is sound and the problem is mechanical: springs, cables, rollers, track, or the opener. Replace when the panels are cracked or rusted through, the door is out of balance structurally, or the repair cost approaches half the price of a new door. General garage door repair runs $150 – $600, so a repair that lands near the top of that range on a door older than its useful life is worth comparing against a new installation at $700 – $2,200.
The honest test: if two or more major components are failing at once, replacement is usually the better spend. If it’s one component, repair wins almost every time. Spring repair alone is $180 – $340 per spring, and a matched pair is usually replaced together, so a pair costs about twice that range. That’s still well below a new door, which is why we look at the door’s condition before recommending replacement.
Common Questions About Garage Door Installation Cost in Raleigh
How much does garage door installation cost in Raleigh?
Garage door installation in Raleigh typically costs $700 – $2,200 for the door and labor, with opener installation adding $250 – $550. The written estimate sets the final price. Call (866) 942-6232 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door in Raleigh?
Repair is usually cheaper. General repair runs $150 – $600, while a new door runs $700 – $2,200. If the panels are sound and the problem is the opener, springs, or track, repair is the right call. If structural damage has spread across the door, replacement is the better spend. We’ll tell you which one actually makes sense for your door. Call (866) 942-6232 for a free estimate.
Can you install a garage door on the same day in Raleigh?
Same-day installation is rarely possible because the door has to be measured and ordered, so most installations are scheduled. Same-day repair on a door you already have is often available. Call (866) 942-6232 and we’ll tell you what’s realistic. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How much does garage door opener installation cost in Raleigh?
Opener installation in Raleigh typically costs $250 – $550, depending on the opener type and whether new wiring is needed. That’s separate from the door installation cost of $700 – $2,200. Call (866) 942-6232 for a free estimate.
Do I need a permit to install a garage door in Raleigh?
Most cities don’t require a permit for a straight door swap, but requirements vary by municipality and by whether framing or electrical work is involved. Ask Raleigh’s building department directly before scheduling if you’re unsure, and we’ll tell you what the job involves so you know what to ask about. Call (866) 942-6232 for a free estimate.
Why Work With Us on a Raleigh Garage Door Installation?
We work on the brand you already have or the one you want, and we don’t push a single manufacturer’s product. Technicians are trained across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so the recommendation is based on your door and your opening, not on what a brand partnership pays. Opener work is treated as its own specialty – your opener is the brain of the system, and most modern calls involve one – so it gets the same attention as the door itself.
Diagnosed correctly the first time is the goal on every job. If something needs replacing, we say so. If it just needs adjustment, we say that too. Repair, opener repair, and installation are all handled by the same company, so there’s no subcontracting and no being told “that’s not our department.”
Get a Free Garage Door Installation Estimate in Raleigh
If you’re ready to replace a door or you’re weighing a repair against a new installation, the first step is a written estimate. Call (866) 942-6232 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We serve Raleigh and the surrounding area, and we’ll give you a number in writing before anything starts.
Pricing reflects the Raleigh market as of 2026. Orchard Garage Door Repair offers free estimates – call (866) 942-6232.
Written by the team at Orchard Garage Door Repair.
Quick Reference
- New door installation, single: $700 – $1,400 typical
- New door installation, double: $1,200 – $2,200 typical
- Opener installation: $250 – $550 typical
- Panel replacement: $250 – $500 typical
- General repair: $150 – $600 typical
- Spring repair: $180 – $340 per spring; a pair costs about twice that
- Cable repair: $130 – $250 typical
- Track realignment: $120 – $240 typical
- Roller replacement: $110 – $220 typical
Want to know more about a specific repair before you decide on a new door? Our team handles garage door repair, opener repair, and installation, so a single call tells you what you’re actually dealing with. Call (866) 942-6232. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Yolanda Robinson"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Terrence Carter"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Paige Doyle